Our Product
Waterproofing SANPROOF WATERPROOFING
SANPROOF WATERPROOFING WB is a single component waterproofing paint using a polymer that is elastic, strongly adherent, easy, and practical in its use. It provides long-term protection against weather and leakage and is suitable for tropical climates because it is resistant to heat and ultraviolet light.
Uses:
- Prevents water seepage.
- Close the crack on the surface of the plaster.
- Prevent spots on the inner wall.
- Prevent mold and mildew on the inner wall/ inner chamber.
Advantage:
- Non-toxic and easy to apply
- Elastic and anti-cracking
- Resistant to heat and UV rays
- High adhesion to various substrates.
- Decorative (available in various colors)
Direction of Use:
SURFACE PREPARATION: Clean the surface to be coated from oil, moss, dust, old flaking paint, and other impurities. Use sandpaper, wire brush and soap, and hot water (if necessary) for cleaning. The plastered surface that has hairline cracks can be patched first using SANPROOF WATERPROOFING WB. Larger cracks must be patched first using a mixture of SANPROOF WATERPROOFING WB with fine sand with a volume 1:1. For best results, the surface to be coated is given a coat consisting of a mixture of cement and bonding agent.
APPLICATION: Apply the first coat and let it touch dry. Apply the second coat across the first cost and let it dry completely. To strengthen the application over a moving joint, use polyester gauze over the first coat which is still wet. If it is too thick, dilute SANPROOF WATERPROOFING WB with a maximum of 20 %.
| Komposisi | Acrylic Emulsion | |
| Daya Sebar | Waterproofing 1m² / kg / layer, decorative 8-10 m² / kg / layer | |
| Pengenceran | Waterproofing | No need to diluted |
| Brush, roll | 10 - 20% Water | |
| Spray | 30 - 40% Water | |
| Dry time | Recoating in 1,5 - 2 hours, perfectly dry in 24 hours | |