Produk Kami
Cat Dekoratif MAXEE COAT
Deskripsi :
MAXEE COAT WALL PAINT adalah cat tembok berbahan dasar emulsi akrilik dengan
pigmen pilihan yang menghasilkan warna lembut dan eksklusif. MAXEE COAT WALL
CAT dapat digunakan baik di dalam maupun di luar gedung. MAXEE COAT WALL CAT
memiliki daya rekat yang baik pada beton baru dan lama, fiberboard, semen, dan
hardboard.
Keuntungan :
- Tahan terhadap sinar matahari dan kondisi cuaca di daerah tropis.
- Tahan terhadap alkali dinding / beton.
- Dapat dibersihkan dengan air.
Description :
MAXEE COAT WALL PAINT is wall paint made based on acrylic emulsion with selected pigments that produce soft and exclusive colors. MAXEE COAT WALL PAINT can be used both inside and outside the building. MAXEE COAT WALL PAINT has good adhesion to new and old concrete, fiberboard, cement, and hardboard.
Advantage :
- Resistant to sunlight and weather conditions in the tropics
- Resistant to alkalis walls/concrete
- can be cleaned with water
Arah Penggunaan :
- Beton baru : Aplikasikan PREMIO ALKALI RESISTING PRIMER WATER BASE atau
PREMIO ALKALI RESISTING PRIMER SOLVENT BASE. Untuk menghaluskan permukaan aplikasikan Maxee Wall Filler ( Khusus interior ). - Pengecatan ulang : Menghilangkan cat lama yang mengelupas, kapur, dan
kontaminan lainnya. Perlu juga diperbaiki terlebih dahulu jika dinding basah
atau karena resapan air maka dilapisi terlebih dahulu menggunakan PREMIO ALKALI
RESISTING PRIMER WATER BASE atau PREMIO ALKALI RESISTING PRIMER SOLVENT BASE sebelum pengecatan dengan Maxee Wall Filler ( Khusus interior). - kemudian diampelas hingga halus dan rata, dan aplikasikan MAXEE COAT WALL CAT 2-3 ( dua sampai tiga ) lapis.
- Biarkan cat benar-benar kering sebelum mengaplikasikan lapisan berikutnya.
Direction of Use:
- New concrete: Apply the PREMIO ALKALI RESISTING PRIMER WATER BASE or PREMIO ALKALI RESISTING PRIMER SOLVENT BASE. To smoothen the surface apply Maxee Wall Filler ( Interior only ).
- Repainting: Remove old peeling paint, chalk, and other contaminants. It also needs to be repaired first if the wall is wet , or because of water infiltration, then it is coated first using the PREMIO ALKALI RESISTING PRIMER WATER BASE or PREMIO ALKALI RESISTING PRIMER SOLVENT BASE before painting with Maxee Wall Filler ( Interior only ).
- then sanded until smooth and even, and apply MAXEE COAT WALL PAINT 2-3 ( two to three ) coats.
- Allow the paint to dry completely before applying next coat.
Spesification :
Composition : Acrylic Emulsion
Spreading Rate : 9-10 m² / Kg ( One Coat )
Apllication & Thinning :
-Brush , Roller ( 10 - 20% ) Clean Water.
Re Coat Time : 30 Minutes Minimum.
Spesifikasi :
| Komposisi | Acrylic Emulsion | |
| Daya Sebar | 9-10 m² / kg (satu lapisan) | |
| Pengenceran | Kuas, roll | 10 - 20% Air Bersih |
| Waktu Kering | Pelapisan Ulang Minimal 30 menit | |